|
|
Followings are the list of papers related to the rock mechanics and rock engineering published in 2002. All papers are written by the members of the rock mechanics division, the Mining and Materials Processing Institute of Japan.
The abstract of each paper can be refered by clicking "Title" of each paper.
Title The Processes of Crack Development in Saturated Welded Tuff Specimen by Freezing and Thawing Cycles
Autors Tiancheng CHEN, Noriyasu MORI, Takashi GOTO, Teruyuki SUZUKI and Masahiro HIRAMATSU Keywords Freezing and Thawing, Saturated Welded Tuff, Crack Development, Pore Water Migration
Title Strength, Deformability and Thermal Properties of Artificial Rocks under High and Low Temperatures
Autors Yoshinori INADA, Naoki KINOSHITA, Jiro TAKAHASHI, Kazumasa NAKATO, Akira TOKAJI and Akira SHIMMURA Keywords Artificial Rocks, High and Low Temperatures, Thermal Hysteresis, Strength and Deformability,Thermal Properties
Title Analysis of Ventilation Network and Ventilation at Heading Faces Autors Masahiro INOUE Keywords Mine, Underground, Ventilation, Network, Safety
Title Multistage Creep Test of Inada Granite and Estimation of Long-term Life Time under Confining Pressure Autors Tsutomu YAMAGUCHI, Seisuke OKUBO, Enrico MARANINI and Takashi NARITA Keywords Rock, Failure Criteria, Multistage Creep, Time-dependent Behavior, Life Time, Constitutive Equation
Title Attenuation of Elastic Wave Velocity / Height and Lateral Strain in Uniaxial Compression test with special attention to the results of uniaxial tension test Autors Seisuke OKUBO, Katsunori FUKUI and Tomonari OGIINO Keywords Rock, Elastic Wave, Elastic Wave Velocity, Attenuation, Uniaxial Compression Test
Title Numerical Simulation of Bending Test of Steel-Fiber Reinforced Mortar Autors Seisuke OKUBO and Katsunori FUKUI Keywords Steel Fiber, Bending Test, Constitutive Equation, REM, Simulation
Title Estimation of the Fatigue Strength of Granite Subjectedto Long-period Cyclic Loading Autors Jun-ichi KODAMA Yoshio ISHIZUKA, Tohru ABE3 ISHIJIMA and Tatsuhiko GOTO Keywords Fatigue Life, Granite, Excitation Frequency, Long-period Loading, Fatigue Strength
Title Recent In Situ Oil Recovery Technologies for Extra Heavy Oil Reserves such as Oil Sands Autors Kyuro SASAKI, Satoshi AKIBAYASHI and Toshiyuki HIRATA Keywords Extra Heavy Oil, Enhanced Oil Recovery, In Situ, Oil Sands, SAGD, Steam
Title Influence of Water and Loading Rate on Deformation and Failure Behavior of Shirahama Sandstone Autors Yasuyuki FUJITA, Yoshiaki FUJII and Yoji ISHIJIMA Keywords Shirahama Sandstone, Water, Loading Rate, Uniaxial Compression Test, Brazilian Test, Fracture Toughness Test
Title Estimation of Global Stress State in Mt. Torigata Region Autors Katsuhiko KANEKO, Naoaki NAKAMURA, Yuzo OBARA, Kousuke ITO, Tetsuro YONEDA and Masaji KATO Keywords Global Stress, Stress Measurement, 3-dim. Analysis, Open Cut Mine, Limestone
Title Shear Displacement Behavior of Rocks in Shear Fatigue Process
― Experimental study on cyclic fatigue process of rocks under direct shear test (2nd Report) ―Autors Fumio SUGIMOTO, Mitsumasa FURUZUMI, Mamoru ABE and Tadao IMAI Keywords Rock, Cyclic Shear Loading, Shear Displacement, Rate of Shear Displacement, Shear Stress-Shear Displacement Curve
Title Experiment Study for Flying Characteristics and Control of Fly Rock Caused by Blasting Autors Yuji OGATA, Yuji WADA, Masahiro SETO and Kunihisa KATSUYAMA Keywords Fly Rock, Hopkinson Effect, Control Blasting, DDA
Title Distributions of Strength and Creep Failure Time of Inada Granite Under Confining Pressure Autors Tsutomu YAMAGUCHI and Seisuke OKUBO Keywords Rock, Failure Criterion, Strength, Creep Failure Time, Time-dependent Behavior, Constitutive Equation
Title Subcritical Crack Growth and Rate Dependent Tensile Failure of Sandstones Autors Masahiro SETO, Manabu UTAGAWA and Woo-Jin JUNG Keywords Subcritical Crack Growth, Sandstone, Tensile Strength, Strain Rate Dependency
Title Evaluation of Shut-in Pressure by Fracture Opening Displacement Measurement Autors Takashi TAKEHARA, Tsatomu YAMAGUCHI, Voshiaki MIZUTA, Takashi NARITA and Harnynki ISHIHARA Keywords Subcritical Crack Growth, Sandstone, Tensile Strength, Strain Rate Dependency
Title Behavior of Sandstone Subjected to Slow and Uniform Temperature Changes Autors Haruyuki KITA, Toshinori SATO, Hiroshi TSUJIGAMI, Youqing CHEN, Takashi NISHIYAMA and Katsuhiko KANEKO Keywords Sandstone, High Temperature, Pore Space, Microcrack, Matrix
Title A Selecting Method for Mining Design and Development Autors Seisuke OKUBO and Jiro YAMATOMI Keywords Mining Method, Selection Method, Rock Mass Classification, Expert System
Title An Expert System for Selecting Mining Method Autors Seisuke OKUBO, Jiro YAMATOMI and Yuichi NISHIMATSU Keywords Mining Method, Selection Method, Rock Mass Classification, Expert System
Title Analysis of Water Jet Drilling and Chipping upon Drilling by the Third Power Method Autors Katsuhiko SUGAWARA, Akira SATO and Takayuki HAMAURA Keywords Water Jet, Erosion, Chipping, Drilling, Rock, Fracture
Title Rock Mass Classification of Granite by TBM Cutting Force Autors Katsunori FUKUI, Seisuke OKUBO, Kazunori MATSUMOTO, Yoshihisa NAWA, Teruo SAKAI and Izumi NISHIZAWA Keywords Tunnel Boring Machine, Rock Strength, Rock Mass Classification, Cutting Force, Granite
Title Mechanism of Chipping upon Water Jet Drilling in Rock Autors Katsuhiko SUGAWARA, Akira SATO and Takayuki HAMAURA Keywords Water Jet, Erosion, Chipping, Drilling, Rock, Fracture
Title Consideration on DSCA and AE Methods for Stress Measurement by Comparing with Corediscing Information and Others Autors Koichi SHIN, Yasuki OIKAWA and Hisatoshi ITO Keywords DSCA, AE, Rock Stress, Corediscing, Two-Lines-Fitting Scan Method
Title Damage of Rock Core due to Tensile Stresses during Boring under In-situ Stresses and its Relation to DSCA Autors Koji MATSUKI, Wataru IINO and Kiyotoshi SAKAGUCHI Keywords Crack Density, Tensile Stress, DSCA, Damage of Rock Core, Boring Under Stresses
Title Study on Prediction Equation of Thrust in Curved Jacking Area
―Estimation of thrust in using shurry pipe-jacking (2nd Report) ―Autors Hideki SHIMADA, Masafurni INOUE, Takashi SASAOKA, Shiro KUBOTA and Kikuo MATSUI Keywords Slurry Pipe-jacking, Thrust, Curved Jacking, Prediction Equation, Mud Slurry, Mud Screen
Title Numerical Simulation of Drilling with Button Bit Autors Seisuke OKUBO and Katsunori FUKUI Keywords Drilling, Rock Drill, Burton Bit, Button Chip, Numerical Simulation
